Set The Date Format; Adding The Date To Copies (Date) - Sharp MX-C312 Operation Manual

ADDING THE DATE TO COPIES (Date)

The date can be printed on copies. The position of the date, colour, format, and page (first page only or all pages) can
be selected.
Example: Printing APRIL 4, 2013 in the top right corner of the paper.
Touch the [Date] key in the stamp selection screen.
1
See steps 1 to 4 of "GENERAL PROCEDURE FOR USING
Stamp
Date
YYYY/MM/DD
MM/DD/YYYY
2
DD/MM/YYYY
MM DD, YYYY
(1)
Stamp
Date
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
MM DD, YYYY
3
• If you selected a colour other than [Bk (Black)], press the [COLOUR START] key. Pressing the [BLACK & WHITE
START] key will print the date in black and white.
• If the date is printed in colour on a black and white copy, the copy will be included in the full colour count.
Cancel OK
First Page
Print Colour
Bk(Black)
All Pages
04/APR/2013
Date Change
(2)
Cancel OK
First Page
Print Colour
Bk(Black)
All Pages
04/APR/2013
Date Change
04/APR/2013
STAMP" (page 2-59).

Set the date format.

(1) Touch the key that shows the desired date
format.
(2) If you selected [YYYY/MM/DD],
[MM/DD/YYYY], or [DD/MM/YYYY], touch the
[/], [.], [-], or [ ] key to select the separator.
Touch the [Print Colour] key and select
the print colour.
Touch the desired colour and touch the [OK] key.
Stamp
Print Colour
Bk(Black)
R(Red) G(Green)
C(Cyan) M(Magenta)
2-61
COPIER
OK
B(Blue)
Y(Yellow)
Contents