Changing The Colour Mode - Sharp MX-C312 Operation Manual

CHANGING THE COLOUR MODE

This procedure is used to change the colour mode used to scan the original when the [COLOUR START] key or the
[BLACK & WHITE START] key is pressed.
This function cannot be used in Internet fax mode.
Start key
[COLOUR START]
key
[BLACK & WHITE
START] key
Select the mode and display the colour mode settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Colour Mode] key.
☞
IMAGE SETTINGS
Scan/Colour Mode
Colour Mode
Full Colour
Auto
2
B/W Mode
Mono2
(1)
• System Settings (Administrator): Default Colour Mode Settings
The default colour mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the colour mode.
Mode
The machine detects whether the original is colour or black and white and
Auto automatically selects full colour or black and white (Mono2 or Greyscale)
scanning.
The original is scanned in full colour. This mode is best for full colour
Full Colour
originals such as catalogues.
Colours in the original are scanned as black or white. This mode is best for
Mono2
text-only originals.
The colours in the original are scanned in black and white as shades of
Greyscale
grey (greyscale).
(page 5-49)
OK
Mono2
Greyscale
Greyscale
(2) (3)
Scanning method
Select the colour mode.
(1) Touch the key of the mode to be used when
the [COLOUR START] key is pressed.
You can select whether black & white scanning will take
place in Mono2 or greyscale when [Auto] is selected and
a black and white original is scanned. Note that if the file
format is set to JPEG, scanning will take place in
greyscale.
(2) Touch the key of the mode to be used when
the [BLACK & WHITE START] key is
pressed.
(3) Touch the [OK] key.
5-64
SCANNER/INTERNET FAX
Contents