Frequently Asked Questions - Sharp MX-2301N Quick Start Manual

FREQUENTLY ASKED QUESTIONS

Making a copy of a non-standard size original
The procedure for making a copy of a payment slip or other non-standard
size original is explained below.
The "Centring" special mode of copy mode can be selected to position the
copied image in the centre of the paper.
1 Place the originals.
3 Place paper in the bypass tray.
The bypass tray is used here to copy
onto paper that is not loaded in any of
the paper trays of the machine.
104
If the X dimension
(width) of the
document is less than
140 mm (5-1/2") or
the Y dimension
(height) is less than
131 mm (5-5/32"),
place the original on
the document glass.
For a thin original,
use "Slow Scan
Mode".
Type : Recycled
Size : A4
2 Enter the original size.
From the base screen of copy mode,
touch [Job Detail Settings], [Original]
then [Size Input].
Original
X 200
(25 432)
mm
Y 150
(25 297)
mm
Size Input
Standard Size
4 Select the bypass tray.
From the base screen of copy mode,
touch [Job Detail Settings], [Paper Select]
and then "Bypass tray paper type".
Copy Mode
Bypass Tray Type/Size Setting
Select the paper type.
Plain
Pre-Printed Recycled
Pre-Punched Color Thin Paper
Heavy Paper 1 Heavy Paper 2
Transparency
Paper Select
1. A4 Plain
2. B5 Plain
Plain
3. B4
Plain
4. A3
OK
AUTO
Manual
Custom size
Cancel
1/2
Letter Head
Labels
Tab Paper
1/3
OK
A4
Recycled