Link Actuator (Pl3.3.6) - Xerox Phaser 6250 Service Manual

Link Actuator (PL3.3.6)

Note
Perform this procedure from the rear of the printer.
1.
Pull the paper tray out of the printer.
2.
Remove the paper tray Rear Cover by pushing in on the left side until the cover
comes off the left mounting tab, then remove it from the right tab.
3.
Reach in through the rear of the printer and spread the tabs of the Link Actuator
(item #1) apart and disconnect it from the Actuator No Paper (item #2).
4.
Remove the link actuator from the bracket in the printer and remove.
8-32
1
2
Phaser 6250 Color Laser Printer Service Manual
6250-157