Chute Assembly Exit; Chute Assembly Exit (Pl 7.1.1) - Xerox Phaser 6250 Service Manual

Chute Assembly Exit

Chute Assembly Exit (PL 7.1.1)

1.
Remove the Front Cover (page 8-6).
2.
Remove the Front Left Cover (page 8-16).
3.
Disconnect P/J131 and shift the harness to the side of the Chute Assembly Out.
4. Remove the 2 screws, the upper screw is attached to the static discharge harness,
securing the Chute Assembly Exit to the Chute Assembly Out.
ACTUATOR FULL
8-62 Phaser 6250 Color Laser Printer Service Manual
CHUTE ASSY EXIT
LEFT
6250-193