Tray 1 Feed Solenoid (Pl 6.1.40) - Xerox Phaser 6250 Service Manual

Tray 1 Feed Solenoid (PL 6.1.40)

1.
Remove the Chute Assembly Out (page 8-47).
2.
Unhook the N/F Tray 1 spring (item #1) from the Solenoid Stopper (item #2).
3.
Disconnect P/J132 (orange wires) from the Solenoid and shift the wires out of the
cable guides on the Chute Assembly Out.
4.
Remove 1 screw securing the Feed Solenoid (item #3) to the Chute Assembly
Out and remove.
1
Reassembly Notes
Note
Make sure the solenoid seats properly on the aligning pins. The pins are
plastic.
Service Parts Disassembly
2
3
6250-189
8-59