Tray 1 Actuator (Pl 6.1.37) And Tray 1 Sensor (Pl 6.1.4) - Xerox Phaser 6250 Service Manual

Tray 1 Actuator (PL 6.1.37) and Tray 1 Sensor (PL 6.1.4)

Removal of the Actuator
1.
Remove the Front Left Cover (page 8-16).
2.
Push down on the Tray 1 metal plate and push the actuator in.
3.
Slide the actuator (item #2) to the left and remove to the right.
4.
Remove the spring (item #3) from the actuator.
Caution
Be careful not to lose or damage the spring. Note spring orientation for
reassembly.
Service Parts Disassembly
1
2
3
6250-187
8-53