Mid Roller (Pl 7.1.5) - Xerox Phaser 6250 Service Manual

Mid Roller (PL 7.1.5)

1.
Remove the Chute Assembly Exit (page 8-62)
2.
Release the tab securing the Gear Roll (item #1) and remove the Gear.
3.
Remove the bearing from the left side of the shaft.
4. Remove the e-ring and bearing (item #2) securing the right side of the shaft.
5. Raise the right side of the shaft and pull out the Mid Roll (item #3).
2
8-64
3
Phaser 6250 Color Laser Printer Service Manual
4
1
LEFT
6250-195