Xerox Phaser 6250 Service Manual page 298

6.
Raise the left side of the Registration Chute Assembly and pull towards the left
side of the printer to remove.
Replacement Notes
Note
Ensure the mylar strip (item #1) is not bent or pinched but seated properly in
the middle cavity of the Registration Chute when reassembling.
When reinstalling the Registration Chute, ensure that the spring on the left
rear corner does not get damaged and that it makes contact with the electrical
connection on the Engine Control Board.
8-72 Phaser 6250 Color Laser Printer Service Manual
6250-206