Earth Ground Circuit Board (Pl 11.1.16) - Xerox Phaser 6250 Service Manual

Earth Ground Circuit Board (PL 11.1.16)

1.
Remove the Fuser Assembly.
2.
Remove the Transfer Roll Assembly.
3.
Remove the Chute Assembly Registration (page 8-71).
4. Remove the Housing Assembly Retard (page 8-37).
Note
Loosen the screw securing the grounding strap at the left side of the board to
allow removal of the board without bending the grounding strap.
5. Remove the 2 screws securing the Ground Circuit Board (item #1) and remove
the board.
1
Service Parts Disassembly
6250-238
8-97