Fuser Drive Assembly (Pl 5.1.18) - Xerox Phaser 6250 Service Manual

Fuser Drive Assembly (PL 5.1.18)

1.
Remove the Chute Assembly Out (page 8-47).
2.
Remove the Chute Assembly In (page 8-41).
3.
Remove Right Latch (Door A) (page 8-45).
4. Remove the 1 screw securing the fuser ground wire to the Fuser Drive Assembly.
5. Carefully remove the harness attached to the Fuser Drive Assembly from the
cable guides in the Chute Assembly In housing.
6.
Remove the 3 screws securing the Fuser Drive Assembly to the Chute Assembly
In.
7.
Remove the Fuser Drive Assembly.
Replacement Notes
Note
Note the routing of the wires for reassembly
8-44 Phaser 6250 Color Laser Printer Service Manual
6250-172