Chute Assembly Out - Xerox Phaser 6250 Service Manual

Chute Assembly Out

8
1. Full Stack (Output Tray Full) Sensor:
accumulation of print media) by the position of the actuator. This is only checked
when the paper is feeding into the exit.
2. Duplex Jam Sensor:
through the duplex roller based on the position of the actuator.
3. Duplex Roller:
feeds the print media returned from the chute assembly exit to the roll turn in the
retard housing assembly.
4. Gear (Main Drive):
5. Tray 1 Gear:
6. Feed Roll Assembly:
gear and the idler gear are engaged by the force of the spring solenoid. The feed
roll rotates from the drive of the Main Drive Assembly and feeds paper from
Theory of Operation
1
6
7
Detects when print media has reached and passed
The duplex roller rotates under drive from the duplex motor and
See Feed Roll Assembly.
See Feed Roll Assembly.
When the Tray 1 feed soleniod energizes, the Tray 1
2
3
Detects a full output tray (over
4
5
6250-059
2-29