Xerox Phaser 6250 Service Manual page 401

PL 10.1 Toner Cartridge Holder Unit Assemblies - Service Parts List
ID No. Part Number
1. 116-1599-00*
2. 116-1600-00*
3. 116-1601-00*
4. 116-1602-00*
5. 116-1603-00*
6. 116-1604-00*
7. 106R00670*
106R00674*
8. 106R00669*
106R00673*
9. 106R00668*
106R00672*
10. 106R00671*
106R00675*
11. 116-1606-00*
12. 116-1467-00
13. 116-1633-00*
14. 116-1468-00
15. 116-1469-00
16.
17.
18.
19.
20.
21. 116-1607-00*
22. 116-1605-00*
23. 116-1630-00
Note
** When a new EEPROM Board is installed in the printer, the CRUM data
written to the EEPROM makes it unique to that printer. The EEPROM board
cannot be re-used in another printer.
Parts List
Qty Name/Description
1 Holder, Toner Cartridge Assembly, Yellow
1 Holder, Toner Cartridge Assembly, Magenta
1 Holder, Toner Cartridge Assembly, Cyan
1 Holder, Toner Cartridge Assembly, Black
1 Sensor, No Toner
1 Switch Bracket, Toner CTG-IN
1 Yellow Toner Cartridge, Standard-Capacity
1 Yellow Toner Cartridge, High-Capacity
1 Magenta Toner Cartridge, Standard-Capacity
1 Magenta Toner Cartridge, High-Capacity
1 Cyan Toner Cartridge, Standard-Capacity
1 Cyan Toner Cartridge, High-Capacity
1 Black Toner Cartridge, Standard-Capacity
1 Black Toner Cartridge, High-Capacity
1 Harness Assy, TNR4 (J51-J511/J432/J512/J513/J514/
J701/J703/J704/J342)
1 Assembly , Harness CRUM (J71-J710)
1 Assembly, Plate Dispenser
1 **Circuit Board, EEPROM
1 Sub-High-Voltage Power Supply
1 HSG Base, CRUM (NS, part of item 21)
1 HSG Assy, Coil Reader (NS, part of item 21)
1 Circuit Board, CRUM Reader (NS, part of item 21)
1 Harness Assy, RF1D2 (J341~J3411)(NS, part of item 21)
1 Cover, CRUM Holder (NS, part of item 21)
1 Box Assy, CRUM Reader (with 16 ~ 20)
1 Actuator, Toner CTG-IN
1 Kit, Rack V (Gear, Rack)
9-29