Servo Sett (Aircraft And Helicopter) - GRAUPNER m-12 HOTT Operating Instruction

press
24
ENT
TEL VIW
ESC

3. Servo sett (Aircraft and Helicopter)

The servo sett adjusts the servo reverse, center, travel for all six channels.
ENT
TEL VIW
- Rev : used to reverse the servo direction for all channels.
ESC
- Cent : used to set the neutral position of the servo.
- Trv : used to increase or decrease the moving angle of the servo travel.
press
- Rev (Reverse)
Press the direction button to highlight the servo sett then press the ENT button to access the
ENT
function. The cursor is at the rev value, the arrow mark, in the S1 line then press the ENT
TEL VIW
button to highlight the arrow mark. Press the direction button then the arrow mark is reversed
ESC
and the direction of the servo in S1 (throttle channel) is reversed. Press the ENT button to
remove the highlight. The S2~S6 channels can be program in the same method with the S1.
press
- Cent (Center)
ENT Press the direction button to select the cent value in the S1 line then press the ENT button to
highlight the value. Press the direction button to adjust the desired center value. Check the
TEL VIW
neutral position of the model with adjusting the center value of the S1. Press the ENT button to
ESC
remove the highlight. The S2~S6 channels can be program in the same method with the S1.
- Trv (Travel)
Press the direction button to select the trv value of the S1 line then press the ENT button to
ENT
highlight the value. Press the direction button to adjust the desired value then press the ESC
TEL VIW
button to remove the highlight. Move the stick to select the other trv value then press the ENT
ESC button to highlight. Press the direction button to select desired value. Press the ENT button
to remove the highlight and press ESC button get back to the menu screen. The S2~S6
channels can be program in the same method with the S1.
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC