Table of Contents
Advertisement
Graupner mz-32 / mz-16 Help Reference Manual
parameters.
The Trim field is your sub trim value for centering your servo or control surfaces.
The Travel and Limit fields let you adjust servo throws and maximal servo deflection. Set
the deflection to a value where the servo does not mechanically bind.
The value in the Delay fields will determine the speed of the control movement.
All settings in the Servo Set menu are applied globally and are not Phase dependent.
NOTE
Please be careful when making changes to the throttle direction as it may unexpectedly
start the motor. Always ensure that the propeller or main battery are disconnected.
B04S1
Trim: your sub trim for centering your servo or control surfaces.
Travel: sets the desired travel range for your servo.
Limit: sets the maximal servo deflection to a value where the servo does not mechanically
bind.
B04S2
SERVO SET
In the Servo Set menu you can make all basic
adjustments to your servos to optimally tune them to
your model.
The first two columns show the channel number and
channel name. Tapping on the channel number or
name shows the edit bar where you can name or
rename your channel name. Choose a proper channel
name that will help you identify each channel function.
The Direction field enables you to reverse the channel
direction.
Tapping on the Detail icon lets you fine tune servo
SERVO SET DETAIL
The Servo Set Detail menu enables you to fine tune
your servo settings.
Balance: Here you can adjust the servo travel to
ensure that each control surface is moving in an
identical way. To make changes to a curve point, move
the control over the point to select or by tapping on the
input field under the balance column.
When a curve point is selected, it will turn orange. Now
you can either move the curve point using the arrow
keys or with the orange slider tab along the vertical
axis.
Page 16 of 51
Help-Ref-EN-V2.7
Advertisement
Table of Contents
