Rotor Direct 22P; Pitch Min 22P - GRAUPNER m-12 HOTT Operating Instruction

press
press
press
After completing the normal quick link adjustment, press the direction button to select the
thermal quick link line. The thermal quick link and speed quick link can be programmed in
ENT
the same method. If you already set the quick link switch and the switch is ON, the cursor is
TEL VIW
automatically moved to the corresponding quick link value.
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
2-1. Model type (Helicopter) : 5 functions are available
ESC
press
• Swashplate
Use the swashplate function to set the swahplate type to match your Helicopter model.
It supports 6 value (1servo, 2 servo,3sv(2rol),3sv(140),3sv(2nic),4sv(90))
ENT
• Cut off
TEL VIW
The cut off function allows to turn off the internal combustion engine or the electric motor.
ESC
• Rotor direct
Use the rotor direct function to set the rotation direction of the main rotor.
• Pitch min
Use the pitch min function to reverse the servo direction in all of pitch, elevator, aileron and
ENT
throttle
TEL VIW
channels, the default value is rear. Available settings are rear and front.
ESC
If the thermal quick link switch is ON, the cursor is moved to the
- thermal quick link의 의의의의 ON의의 의의의의 normal의의 thermal의 의의의의 ON 의의 의의의 의의의
thermal quick link and the user can check the thermal quick link is ON
의의.
If the speed quick link switch is ON, the cursor is moved to the speed
- thermal quick link의 의의의의 ON의의 의의의의 normal의의 thermal의 의의의의 ON 의의 의의의 의의의
quick link and the user can check the speed quick link is ON
의의.
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
19