GRAUPNER m-12 HOTT Operating Instruction page 36

- Brak->flap
Press the direction button to select the brak -> flap line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button
to remove the highlight. Press the direction button to select the hyphen then press the ENT
button. The popup message "push desired switch into position on" appears. Move the switch
then the corresponding value appears (The brak -> flap mixing is on/off when the switch is
moved). Press the direction button to select other mixing.
press
press
36
- Brak->aile
press
Press the direction button to select the brak -> aile line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button to
ENT
remove the highlight. Press the direction button to select the hyphen then press the ENT but-
TEL VIW
ton. The popup message "push desired switch into position on" appears. Move the switch then
ESC
the corresponding value appears (The brak -> aile mixing is on/off when the switch is moved).
Press the direction button to select other mixing.
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC