GRAUPNER m-12 HOTT Operating Instruction page 14

- Motor at C1 idel re
The idle position of the throttle stick (C1) is back, toward the user, if the throttle stick is not there,
the throttle warning message "Throttle too high" appears and the cut off option is activated.
press
- Motor at C1 idel fr
The idle position of the throttle stick (C1) is forward, away from the user, if the throttle
stick is not there, the throttle warning message "Throttle too high" appears and the cut off
option is activated.
WARNING : Ensure that any internal-combustion engine or electric motor shouldn't be
running accidentally during the programming process.
14
- Cut off
When the option of "idle re" or "idle fr" is selected, the cut off option is activated. It turns off
ENT
the internal combustion engine or the electric motor.
TEL VIW
Press the ENT button to remove the highlight of the motor at C1 value then press the
ESC
direction button to select the cut off line. Press the ENT button to highlight -100% of the cut
off value then press the direction button to adjust the value. Press the ENT button to remove
the highlight
NOTE : The value of -100% is the cut off position the user can program, if the cut off value is
programmed less than -100%, the breathing hole of Engine carburetor is block or the speed
controller make the motor off so the power is not delivered to the airplane.
ENT
TEL VIW
ESC
1 time press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC