Quick Link Sett 17~18P - GRAUPNER m-12 HOTT Operating Instruction

press
- Quick link sett
The quick link sett function allows to adjust the D/R expo value and to assign the corre-
sponding switch to cope with various flight conditions such as 3D flight or the flight with the
strong wind. Since the adjusted value is activated by moving the switch, you can cope with
various flight conditions with switch. It makes you operating the flight much easier.
You can select take off, thermal, dist, speed, acro, landing, air-tor, test at quick2 and
quick3.
Press the direction button to select the quick link sett then press the ENT button to access
the function. Press the direction button to select the qucik2 line or the quick3 line then
press the ENT button to highlight the value. Press the direction button to select the desired
value (take off, thermal, dist, speed, acro, landing, air-tor, test at quick2 and quick3). Press
the ENT button to remove the highlight then press the direction button to select the hyphen.
If you press the ENT button, the popup message "push desired switch into position on"
appears. Move the switch to the desired position then the corresponding value appears.
Press the ESC button to get back to the m.type + quick screen then the quick link program-
ming is completed.
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
1 time press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
17