Trainer (Aircraft And Helicopter) - GRAUPNER m-12 HOTT Operating Instruction

press
press
54
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC

13. Trainer (Aircraft and Helicopter)

ENT
TEL VIW
ESC
The mz-12 has the trainer function. The function activates when you select Teacher, Pupil
press
and Normal mode. You may use this function by wireless and wired.
- The teacher mode programming setup
ENT
TEL VIW
Press the direction button to highlight the teach pupil then press the ENT button to access
ESC
the function. The black dot is on the NO.1 channel indicating NO.1 channel is selected
and the T (Teacher/ the default mode) is assigned. Press the direction button to select the
channel and press the ENT button to select the T (Teacher) or –P (Pupil). After completing
press
to select the desired mode in all channels, press the direction button to select the hyphen.
ENT
Press the ENT button then the popup message "push desired switch into position on"
TEL VIW
appears. Move the switch that you wish to use as the RF switch then the corresponding
ESC
value appears (The trainer function is on/off when that switch is moved). Press the direction
button to select the n/a in the BIND. The transmitter gets ready to bind to the pupil transmit-
ter now.
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC