GRAUPNER m-12 HOTT Operating Instruction page 33

- Diff aile
Press the ENT button to access the diff aile mixing then press the ENT button again
to highlight the value. Press the direction button to adjust the desired value then press
the ESC button to remove the highlight. Press the direction button to select the hyphen
then press the ENT button. The popup message "push desired switch into position on"
appears. Move the switch then the corresponding value appears (The diff aile mixing is
on/off when the switch is moved). Press the direction button to select other mixing.
press
press
press
ENT
TEL VIW
- Diff flap
ESC
Press the direction button to select the diff flaps line and press the ENT button to highlight the
value. Press the direction button to adjust the desired value then press the ESC button to re-
press
move the highlight. Press the direction button to select the hyphen then press the ENT button.
ENT The popup message "push desired switch into position on" appears. Move the switch then the
TEL VIW
corresponding value appears (The diff flaps mixing is on/off when the switch is moved). Press
ESC the direction button to select other mixing.
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
press
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
33