GRAUPNER m-12 HOTT Operating Instruction page 37

- Elev->flap
Press the direction button to select the elec -> flap line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button
to remove the highlight. Press the direction button to select the hyphen then press the ENT
button. The popup message "push desired switch into position on" appears. Move the switch
then the corresponding value appears (The elec -> flap mixing is on/off when the switch is
moved). Press the direction button to select other mixing.
press
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
- Elev->aile
Press the direction button to select the elec -> aile line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button
press
to remove the highlight. Press the direction button to select the hyphen then press the ENT
ENT
button. The popup message "push desired switch into position on" appears. Move the switch
TEL VIW
then the corresponding value appears (The elec -> aile mixing is on/off when the switch is
ESC
moved). Press the direction button to select other mixing.
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
press
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
37