GRAUPNER m-12 HOTT Operating Instruction page 38

press
- Flap->elev
Press the direction button to select the flap -> elev line and press the ENT button to highlight
the value. Press the direction button to adjust the desired value then press the ESC button to
remove the highlight. Press the direction button to select the hyphen then press the ENT button.
The popup message "push desired switch into position on" appears. Move the switch then the
corresponding value appears (The flap -> elev mixing is on/off when the switch is moved). Press
the direction button to select other mixing.
press
38
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
- Flap->aile
Press the direction button to select the flap -> aile line and press the ENT button to highlight
press
the value. Press the direction button to adjust the desired value then press the ESC button to
ENT
remove the highlight. Press the direction button to select the hyphen then press the ENT but-
TEL VIW
ton. The popup message "push desired switch into position on" appears. Move the switch then
ESC
the corresponding value appears (The flap -> aile mixing is on/off when the switch is moved).
Press the direction button to select other mixing.
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC