Pitc-Rudd 42~43P - GRAUPNER m-12 HOTT Operating Instruction

- Pitc->rudd
ruddPress the direction button to select pitc->tail line and press the ENT button to access the
pitc-> tail function. 0% of the point 1 value is highlighted. Move the throttle stick to the high
position step by step then the point 2,3,4,5 is selected in turn. After selecting the point number,
press the direction button to adjust the desired value. Press the ESC button to return to the
previous screen.
NOTE : The default values of the point 2 and point 4 is remained not to be programmed so
the "deact" is displayed at the value box. You may activate and adjust the desired value by the
direction button if you want.
press
press
press
42
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
press
press
press
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC