Governor 8Ch 45P; Free Mix (Aircraft And Helicopter) - GRAUPNER m-12 HOTT Operating Instruction

- Governor 8ch
Press the direction button to select the governor 8ch then press the ENT button to access
the function. The value no of is highlighted. You may select yes or no by the direction
button. Press the ESC button to remove the highlight.
press
- Governor rate
Press the direction button to select the governor rate then press the ENT button to ac-
cess the function. The value 0% of is highlighted. Press the direction button to adjust the
desired value then press the ESC button to remove the highlight.
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
9. free mixer (Aircraft and Helicopter)
The free mixer allows to select the master channel that is controlling channel and the salve
channel. The Master channel will be mixed to the slave channel and the slave channel will follow
ENT
the master channels input based on the rate that is programmed. Three free mixers are available
TEL VIW
for each of the ten model memories.
ESC
- Free mixer
press
Press the ENT button to access the free mixer. The first ?? at M1 line is highlighted then press
the ENT button to highlight the value. The first ?? is for the master channel programming.
Press the direction button to select the master channel then press the ESC button to remove
ENT
the highlight. Press the direction and ENT buttons to select the next M1 ?? and highlight the
TEL VIW
value. The next ?? is for the slave channel programming. Press the direction button to select the
ESC
slave channel then press the ESC button to remove the highlight. Press the direction button to
select the hyphen then press the ENT button then the popup message "push desired switch into
position on" appears. Move the switch then the corresponding value appears (The M1 free mixer
is on/off when the switch is moved).
Press the direction button to select the arrow mark then press the ENT button to access the free
mixer ratio. The SYM is highlighted then press the ENT button to highlight both values of the trv
line. Press the direction button to adjust the desired value. Both values are adjusted simultane-
ously and appeared in the diagram.
press
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
45