Table of Contents
Advertisement
5.02.2 JUMPERS
Serial ports jumpers and their settings appear below:
•
W6, W11, W12, W13 & W14 Serial Port 2 Configuration:
- W6 open and pins 1-2 of W11-W14 shorted:
- Or W6 shorted and pins 2-3 of W11-W14 shorted:
•
W7 RTS2-CTS2 &
W8 DSR2-DTR2:
- W7 and W8 shorted: Loopback, or
- W7 and W8 open: Normal: This is the initial setting.
For location and settings of jumpers, refer to Section 3 of this manual.
5.02.3 AMIBIOS SETUP
Follow these steps, from the AMIBIOS Setup program's main menu:
•
From the Setup window, select the Peripheral icon. To modify settings, the
PROGRAMMING MODE option must first be set to Manual.
•
In the Peripheral Setup screen, the SERIAL PORT 1 option may be set to Disabled,
3F8h, 2F8h, 3E8h or 2E8h (if one of these is used by SERIAL PORT 2, it will not
appear in the scroll list).
•
Also in the Peripheral Setup screen, the SERIAL PORT 2 option may be set to
Disabled, 3F8h, 2F8h, 3E8h or 2E8h (if one of these is used by SERIAL PORT 1, it
will not appear in the scroll list).
For more detail, refer to section 10.02 - AMIBIOS SETUP PROGRAM.
Installing Peripherals (Parallel/Serial)
RS-232: This is the initial setting.
RS-422/RS-485.
5-10
Advertisement
Table of Contents
