Table of Contents
Advertisement
ERROR
NUMBER
(HEX)
(DECIMAL)
1C
28
1D
29
1E
30
1F
31
20
32
21
33
22
34
23
35
24
36
25
37
26
38
27
39
28
40
29
41
2A
42
2B
43
2C
44
2D
45
2E
46
2F
47
30
48
31
49
32
50
VFLASH Software
DESCRIPTION
Flash content does not verify with source.
No device found in specified starting socket.
Cannot create a Flash disk of specified size.
Communication error when reading Flash identification
code.
Cannot use 8086 or 8088 CPU with Flash memory.
No serial port or card attached for transfer.
/S switch not supported with this BIOS.
/G:group value on command line is invalid.
Insufficient Flash or EPROM space to include the volume
label entry.
Cannot
make
[destination] path.
EPROM filename already exists.
EPROM filename path not found.
Selected drive for EPROM files not ready.
Invalid EPROM filename or disk error.
Not enough disk space to copy EPROM files.
Not enough memory for data buffer.
Command line option "/TEKXXX" is invalid.
486SLC internal registers are different from BIOS setup.
The 486SLC cache is not disabled over the Flash device(s).
Unable to erase the nth device.
No VIPer BIOS found.
The source diskette must be DOS Version 4 and up.
Flash ID command to BIOS or data Flash must be issued
first.
11-18
EPROM
with
same
[source]
and
Advertisement
Table of Contents
