Table of Contents
Advertisement
5.01.3 AMIBIOS SETUP
Follow these steps, from the AMIBIOS Setup program's main menu:
•
From the Setup window, select the Peripheral icon. To modify settings, the
PROGRAMMING MODE option must first be set to Manual.
•
In the Peripheral Setup screen, the PARALLEL PORT option may be set to Disabled,
278h, 3BCh or 378h.
•
Also in the Peripheral Setup screen, the PARALLEL PORT MODE option may be set
to Normal, EPP (Enhanced Parallel Port), and Extended (ECP - Extended Capabilities
Port).
For more detail, refer to section 10.02 - AMIBIOS SETUP PROGRAM.
Installing Peripherals (Parallel/Serial)
5-5
Advertisement
Table of Contents
