Table of Contents
Advertisement
BIOS File
The BIOS files are self-extracting files (VXX_XXX.EXE), each including two files: the
flat panel BIOS file (VXX_XXX.BFP) and a DOS text file (VXX_XXX.DOC) for the
BIOS update utility program.
The letters which form the BIOS name are made up of the following parts:
V
XX
Video
Video
BIOS
Controller
Once you have the correct video BIOS file, you need to copy the video BIOS file to your
board's Flash BIOS device. This is done with the BIOS update utility program; see
Section 13 to learn how to perform a video BIOS file update with this TEKNOR utility.
Technical Information File
The related technical information file, which includes the interconnection chart, is a PDF
(Portable Document Format) file. The name of this file identifies the Flat Panel and the
TEKNOR board with its video controller.
Note:
The column labeled EXTERNAL in the Display Interconnection table of the
PDF file refers to the external circuitry or supplies which are needed in
certain cases. This is usually an external power supply or an inverter
frequently used in the clock circuit "SHFCLK" (in the case of V
V
, consult the manufacturer's flat panel data sheet for the actual voltage).
ADJ
An inverter is shown as
column, connections are direct.
_
XX
X
Version
Revision
. When no special circuits are shown in this
and
LCD
Installing Video
8-7
Advertisement
Table of Contents
