Table of Contents
Advertisement
6.02.3 FLOPPY HOOK-UP
Mechanical Floppy Disk Installation:
The installation of the floppy drives is done via a standard IBM 34-pin flat ribbon cable
that connects to J2.
DIAGRAM 6-1: Floppy Disk Cable
Enhanced Floppy Mode:
In order to connect your 2.88MB floppy drive, simply indicate the proper floppy disk drive
in the AMIBIOS Setup program (Section 10); it is not necessary to set the HDOUT and
EDOUT media detection signals jumpers.
Installing IDE, Floppy & SCSI Devices
6-7
Advertisement
Table of Contents
