Table of Contents
Advertisement
13.01 UBIOS - INTERACTIVE MODE
To run the program in interactive mode, type "UBIOS" from the DOS prompt and the
following screen will be displayed:
This is simply a presentation screen. To continue, hit any key on the keyboard. This
brings you to the main menu.
In VT100 mode, type "UBIOS /VT", leaving a space between "UBIOS" and "/VT".
If you have a monochrome monitor or a CGA monitor, type "UBIOS/low", for low
resolution.
The presentation screen in low resolution or VT100 mode is different from the one
appearing above, but it works the same way: To continue, you must hit a key on the
keyboard, which brings you to the main menu.
Updating BIOS With UBIOS
13-2
Advertisement
Table of Contents
