•
The board is ideal for industrial applications; it is designed to operate in environments
where a sturdy and compact system is essential, with features like:
-
Compact half-card format (7.125" x 4.800");
-
Watchdog timer;
-
SMM (System Management Mode) support and full SMI (System Management
Interrupt) interface for power management;
-
Power failure detector;
-
Low battery detector;
-
Shadow RAM BIOS support for fast execution;
-
Flash EPROM boot;
-
Real-Time Clock (RTC) with battery backup;
-
Solid state disks (optional): 2 or 4 MB of user Flash EPROM.
•
The VIPer807 has a multi-function connector which provides all the necessary signals
for connecting the keyboard, speaker, reset button, and hard disk LED.
®
•
The Cirrus Logic
Panel and CRT displays. The VIPer807 comes with 1MB of video memory and a video
feature connector (jumper configurable as a V-PORT). The V-PORT connector
supports TEKNOR's TEK-380 Video Camera Interface Module (VIPer Vision).
•
The VIPer807 includes a local bus IDE hard disk interface for a high performance disk
subsystem.
•
The onboard Fast SCSI II controller supports up to seven SCSI peripherals. The device
can support standard and SCSI II modes.
•
The VIPer807 includes an enhanced super Floppy Controller which supports two
Floppy Disk Drives of up to 2.88MB each, 16 bytes of FIFO buffering and a 48mA
drive buffer.
•
The VIPer807 board has one Parallel Printer port (ECP and EPP modes are
supported), incorporating ChipProtect™ circuitry to protect against damage due to
printer power-on.
•
Serial Port 1 and Serial Port 2 are 16550 compatible with internal 16-byte FIFO
buffers and can be defined as two of the following: COM1, COM2, COM3 or COM4.
•
The Ultra I/O Controller supports the Plug and Play standard and has a Serial
EEPROM onboard for Plug and Play compatibility and configuration storage.
•
The board also includes a PS/2 Mouse port.
•
The board's PC/104 expansion header accepts any PC/104 mezzanine card.
Introduction
2
local bus SVGA Video Controller supports high resolution Flat