Teknor Industrial Computers VIPer807 Technical Reference Manual page 17

Table of Contents

Advertisement

INTRODUCTION
The VIPer807 Single Board Computer is a high performance, fully IBM AT compatible,
PC/AT single board computer. VIP stands for Very Integrated Processor. This board
includes the following features:
The VIPer807 supports the following microprocessors (maximum internal CPU clock
speed and CPU voltage indicated):
-
AMD 486DX2SV running at 66 MHz (3.3V);
-
AMD 486DX4SV running at 100 MHz (3.3V);
-
AMD 5x86 running at 133 MHz (3.3V).
This processor is also referred to as a 486DX5;
-
Intel 486DX running at 33 MHz (5V);
-
Intel 486DX2 running at 66 MHz (5V);
-
Intel 486DX4 running at 100 MHz (3.3V);
-
SGS 486DX2V running at 66 MHz (3.3V);
-
SGS 486DX4V running at 100 MHz (3.3V).
Each microprocessor has Internal Cache Memory.
The VIPer807 board supports the 16-bit standard ISA bus.
System memory can be configured from 1MB to 64MB (128MB when available) of
Dynamic RAM (DRAM) with 36-bit modules installed on the board's two vertical
72-pin SIMM sockets.
The VIPer807 is a multi-purpose computer board:
-
It can be used as a single board computer in conjunction with a passive backplane;
-
Or as part of a stand-alone system with no backplane;
-
It can also operate without any mechanical disks by performing disk operations on
solid state disks (Flash EPROM).
The VIPer807 provides operating systems compatibility for: PC and MS-DOS,
Windows 95, Windows NT, OS/2 Warp, SCO UNIX, QNX, NOVELL and UnixWare.
The voltage level (3.3V or 5V) for Flat Panel control signals is selected by a jumper
setting (W29 jumper).
Introduction
1

Advertisement

Table of Contents
loading

Table of Contents