Load Staples - Lexmark 6500e User Manual

Troubleshooting
Load Manual Feeder with [paper size]
Try one or more of the following:
•
Load the specified paper in the manual feeder.
•
Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
• Touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.
Load Manual Feeder with [paper type] [paper size]
Try one or more of the following:
• Load the specified paper in the manual feeder.
• Touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear the message and continue printing.
•
Touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.

Load staples

Try one or more of the following:
•
Replace the specified staple cartridge in the finisher.
•
Touch Continue to clear the message and continue printing.
Note: The print job will be stapled if the staple cartridge is replaced or inserted.
•
Touch Cancel job to cancel the print job.
Paper changes needed
Try one or more of the following:
• Touch Use current supplies to clear the message and continue printing.
•
Cancel the current print job.
Printer and scanner not connected, check connection and restart both devices
Try one or more of the following:
• Make sure the Ethernet cable is properly connected to the printer and the scanner.
• Restart the printer and scanner.
Reattach bin [x]
Try one or more of the following:
•
Turn the printer off and then back on.
• Reattach the specified bin:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
250