Lexmark 6500e User Manual page 50

Additional printer setup
Note: After the scanner is configured, the software will instruct you to disconnect the temporary USB cable so
you can print wirelessly.
10
Follow the instructions on the computer screen.
Installing the scanner on a wireless network (Macintosh)
Prepare to configure the scanner
1
Connect one end of the green Ethernet cable to the printer and the other end to the scanner.
2
Connect the power cord to the printer and to the scanner, and then to a properly grounded electrical outlet.
3
Turn on the printer and the scanner.
1 2
1
2
2
50
1