Close Door Or Insert Cartridge; Close Finisher Side Door; Disk Corrupted - Lexmark 6500e User Manual

Troubleshooting
4
Remove the indicated tray.
5
Reattach the tray.
6
Connect the power cord to a properly grounded electrical outlet.
7
Turn the printer back on.
If the error occurs again, then:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the tray.
4
Contact customer support.
• From the scanner control panel, touch Continue to clear the message and print without using the tray.

Close door or insert cartridge

The cartridge is missing or not installed correctly. Insert the cartridge and close all doors and covers.

Close finisher side door

Close the side door of the finisher.

Disk corrupted

The scanner attempted a hard disk recovery on a corrupted scanner hard disk, and the hard disk cannot be repaired.
The hard disk must be reformatted.
Touch Format disk to reformat the hard disk and clear the message.
Note: Formatting deletes all the files stored on the hard disk.
Disk full, scan job canceled
The scan job cannot continue because there is insufficient disk space.
Touch Continue to clear the message.
Disk near full. Securely clearing disk space.
Try one or more of the following:
• Touch Continue to clear the message and continue printing.
•
Delete fonts, macros, and other data stored on the scanner hard disk.
•
Install a hard disk with higher capacity.
Error reading USB drive. Remove USB.
An unsupported USB device has been inserted. Remove the USB device, and then install a supported one.
246