Load Staples; Menus Are Disabled; No Held Jobs - Lexmark T656dne User Manual

Understanding printer messages

Load staples

Try one or more of the following:
•
Replace the specified staple cartridge in the finisher.
•
Touch Continue to clear the message and continue printing.
• Touch Cancel job to cancel the print job.
Maintenance
Replace the maintenance items and, if necessary, reset the printer maintenance counter.
For information on purchasing supplies, see
Menu access turned off by system administrator
The printer menus cannot be accessed because your system support person disabled the menus. Wait for the message
to clear.

Menus are Disabled

The printer menus are disabled. The printer settings cannot be changed from the printer control panel. Contact your
system support person for help.
Note: When menus are disabled, it is still possible to cancel a print job, print a confidential job, or print a held job.
Network/Network <x>/Network <x>, <y>
The printer is connected to the network, so the network interface is the active communication link.
•
Network indicates that the printer is using the standard network port built into the printer system board.
•
Network <x> indicates that an internal print server is installed inside the printer or that the printer is connected
to an external print server.
•
Network <x>, <y> indicates a network interface is the active communication link, where <x>, <y> indicates
the active interface is connected to the printer through channel y on PCI connector x. If x equals 0, then the standard
network interface is active.
Note: The current interface displays on the menus settings page.
Wait for the message to clear.

No held jobs

Wait for the message to clear.
No jobs to cancel
Wait for the message to clear.
"Ordering supplies" on page 162.
148