Viewing Reports; Restoring Factory Default Settings - Lexmark 6500e User Manual

Administrative support
If you do not know the IP address or host name of the scanner, then you can:
• View the information on the scanner control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
•
Print a network setup page or menu settings page and locate the information in the TCP/IP section.
2
Click Settings > E‑mail Alert Setup.
3
Select the items for notification, and type the e‑mail addresses.
4
Click Submit.
Note: For information on setting up the e‑mail server, contact your system support person.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the
printer, network, and supplies.
To view reports from a network printer:
1
Type the scanner IP address in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can:
• View the information on the scanner control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
•
Print a network setup page or menu settings page and locate the information in the TCP/IP section.
2
Click Reports, and then click the type of report you want to view.

Restoring factory default settings

If you want to retain a list of the current menu settings for reference, then print a menu settings page before restoring
the factory default settings.
Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory default
settings. Exceptions include the display language, custom sizes and messages, and network/port menu settings. All
downloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk are not affected.
From the home screen, navigate to:
> Settings > General Settings > Factory Defaults > Restore Now > Submit
229