Load Staples - Lexmark MX910 Series User Manual

Troubleshooting
Load Multipurpose Feeder with [custom type name] [paper orientation]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the control panel, touch one of the following:
– Prompt each page, paper loaded or Do not prompt, paper loaded—To clear the message and continue printing.
–
Automatically select paper—To use the paper loaded in the tray.
–
Reset active bin—To reset the active bin for a linked set of bins.
•
Cancel the print job.
Load Multipurpose Feeder with [paper size] [paper orientation]
Try one or more of the following:
•
Load the feeder with the correct size of paper.
•
From the control panel, touch one of the following:
–
Prompt each page, paper loaded or Do not prompt, paper loaded—To clear the message and continue printing.
– Automatically select paper—To use the paper loaded in the tray.
–
Reset active bin—To reset the active bin for a linked set of bins.
•
Cancel the print job.
Load Multipurpose Feeder with [paper type] [paper size] [paper orientation]
Try one or more of the following:
• Load the feeder with the correct size and type of paper.
•
From the control panel, touch one of the following:
–
Prompt each page, paper loaded or Do not prompt, paper loaded—To clear the message and continue printing.
–
Automatically select paper—To use the paper loaded in the tray.
–
Reset active bin—To reset the active bin for a linked set of bins.
• Cancel the print job.

Load staples

Try one or more of the following:
•
Replace or insert the staple cartridge in the finisher.
For instructions on inserting or replacing a staple cartridge in the finisher, touch More information on the printer
control panel.
•
From the printer control panel, touch Continue to clear the message and continue printing.
•
From the printer control panel, touch Cancel job to cancel the print job.
277