Lexmark 6500e User Manual page 159

Understanding the printer menus
Menu item
Configure Log
Enable Audit
No
Yes
Enable Remote Syslog
No
Yes
Remote Syslog Server
Remote Syslog Port
Remote Syslog Method
Normal UDP
Stunnel
Remote Syslog Facility
0–23
Log full behavior
Wrap over oldest entries
E‑mail log then delete all
entries
Admin's e‑mail address
Digitally sign exports
Off
On
Severity of events to log
0–7
Remote Syslog non‑logged
events
No
Yes
E‑mail log cleared alert
No
Yes
E‑mail log wrapped alert
No
Yes
E‑mail % full alert
No
Yes
% full alert level
1 ‑ 99
E‑mail log exported alert
No
Yes
E‑mail log settings changed alert
No
Yes
Log line endings
LF (\n)
CR (\r)
CRLF (\r\n)
Description
Specifies whether and how audit logs are created
Notes:
•
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
• Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
• Remote Syslog Facility determines the value used to send logs to the remote
syslog server. 4 is the factory default setting.
• Remote Syslog Port identifies the port where the device transmits logged
events to a remote server.
•
Remote Syslog Method identifies the protocol used by the device to transmit
logged events to a remote server.
•
Log full behavior determines whether the device automatically overwrites
logged events when it requires additional memory to save current events.
•
Admin's e‑mail address may contain a single e‑mail address or multiple
addresses separated by a comma.
• "Digitally sign exports" determines whether the device automatically signs
each exported security log.
• "Remote Syslog non‑logged events" determines whether the device sends
events to the remote server that has a severity level greater than the value
entered.
• "E‑mail % full alert" enables the device to send an e‑mail to the administrator
if the fills a certain amount of memory space.
• With the security audit log activated, the severity value of each event is
recorded. 4 is the factory default setting.
159