Troubleshooting
88 Cartridge low
1
Remove the specified cartridge.
Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.
2
Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner.
3
Reinsert the cartridge, and then touch Continue to clear the message and continue printing.
Notes:
•
Repeat this procedure multiple times until the print remains faded. When the print remains faded, replace the
cartridge.
•
Have a new cartridge available when the current one no longer prints satisfactorily.
88.xx Replace cartridge
1
Replace the specified toner or print cartridge.
From the scanner control panel, touch More Information for instructions on replacing the cartridge.
2
Touch Continue to clear the message and continue printing.
2yy.xx Close flatbed cover and load originals if restarting job
Try one or more of the following:
•
Touch Cancel job to cancel the job and clear the message.
•
Touch Scan from automatic feeder to resume the scan job from the ADF immediately following the last successfully
scanned page.
•
Touch Scan from flatbed to resume the scan job from the scanner glass immediately following the last successfully
scanned page.
•
Touch Finish job without further scanning to end the scan job at the last successfully scanned page.
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying,
faxing, and e-mailing.
280.06 Paper missing
Try one or more of the following:
•
Touch Continue to clear the message.
•
Touch Cancel job to cancel the job and clear the message.
•
Touch Scan from automatic feeder to resume the scan job from the ADF immediately following the last successfully
scanned page.
•
Touch Scan from flatbed to resume the scan job from the scanner glass immediately following the last successfully
scanned page.
261