Adjusting Sleep Mode; Adjusting The Brightness Of The Display - Lexmark 6500e User Manual

Minimizing your printer's environmental impact

Adjusting Sleep Mode

To save energy, you can decrease the number of minutes before the scanner enters Sleep Mode.
Available settings range from 1–240 minutes.
Using the Embedded Web Server
1
Type the scanner IP address in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can:
•
View the information on the scanner control panel home screen, or in the TCP/IP section under the
Network/Ports menu.
•
Print a network setup page or menu settings page, and then locate the information in the TCP/IP section.
2
Click Settings > General Settings > Timeouts.
3
In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep Mode.
4
Click Submit.
Using the scanner control panel
1
From the home screen, navigate to:
> Settings > General Settings > Timeouts
2
Touch the arrows next to Sleep Mode to select the number of minutes you want the printer to wait before it
enters Sleep Mode.
3
Touch Submit.

Adjusting the brightness of the display

To save energy, or if you have trouble reading your display, then adjust the brightness of the display.
Available settings range from 20–100. The factory default setting is 100.
Using the Embedded Web Server
1
Type the scanner IP address or host name in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can:
•
View the information on the scanner control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
• Print a network setup page or menu settings page, and then locate the information in the TCP/IP section.
2
Click Settings > General Settings.
3
In the Screen Brightness field, enter the brightness percentage you want for the display.
4
Click Submit.
57