Loading paper and specialty media
Loading the envelope feeder
1
Adjust the envelope support for the length of envelope being loaded:
•
Short envelopes—Fully close the envelope support.
•
Medium‑length envelopes—Extend the envelope support to the middle position.
•
Long envelopes—Fully extend the envelope support.
2
Lift the envelope weight back toward the printer.
3
Slide the width guide to the right.
4
Flex the envelopes back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level
surface.
5
Load the stack of envelopes flap side down.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or
self‑stick adhesives. These envelopes may severely damage the printer.
69