Using The Scanback Utility; Understanding The Ftp Options - Lexmark 6500e User Manual

Scanning
The following features are available:
• Scan and send images to your computer
•
Convert scanned images to text
•
Preview the scanned image and adjust the brightness and contrast
•
Make larger scans without losing detail
• Scan two‑sided documents

Using the ScanBack Utility

You can use the Lexmark ScanBack
the Lexmark Web site at http://support.lexmark.com.
1
Set up a scan‑to‑PC profile:
a
Launch the ScanBack Utility.
b
Select the scanner you want to use.
If no scanners are listed, then contact your system support person to obtain a list, or click Setup to manually
search for an IP address or host name.
c
Follow the instructions on your computer screen to define the type of document being scanned and what kind
of output you want to create.
d
Select any of the following:
•
Show MFP Instructions—View or print the final directions.
•
Create Shortcut—Save this group of settings to use again.
e
Click Finish.
A dialog box appears with your scan profile information and the status of the received images.
2
Scan original documents:
a
Load original documents in the ADF or on the scanner glass.
b
From the scanner control panel, navigate to:
Scan/Email > Profiles > select your scan profile > Submit
Note: The scanned image is saved in a directory or launched in the application you specified.

Understanding the FTP options

FTP
This option lets you enter the IP address for the FTP destination.
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
File Name
This option lets you type a file name for the scan image.
TM
Utility to create scan‑to‑PC profiles. The ScanBack Utility can be downloaded from
123