Understanding the printer menus
Menu item
Annotations
Do Not Print
Print
PostScript menu
Menu item
Print PS Error
Off
On
Lock PS Startup Mode
Off
On
Font Priority
Resident
Flash/Disk
PCL Emul menu
Menu item
Font Source
Resident
Disk
Download
Flash
All
Font Name
Courier 10
Description
Prints annotations in a PDF
Note: Do Not Print is the factory default setting.
Description
Prints a page containing the PostScript error
Note: Off is the factory default setting.
Enables users to disable the SysStart file
Note: Off is the factory default setting.
Establishes the font search order
Notes:
•
Resident is the factory default setting.
•
This menu is available only if a formatted flash memory option card or
printer hard disk is installed and operating properly.
•
Make sure the flash memory option card or printer hard disk is not
read/write‑, write‑, or password‑protected.
•
Job Buffer Size must not be set to 100%.
Description
Specifies the set of fonts used by the Font Name menu item
Notes:
•
Resident is the factory default setting. Resident shows the factory default
set of fonts downloaded in RAM.
•
Flash and Disk settings show all fonts resident in that option.
•
The Flash option must be properly formatted and cannot be read/write‑,
write‑, or password‑protected.
•
Download shows all the fonts downloaded in RAM.
•
All shows all fonts available to any option.
Identifies a specific font and the option where it is stored
Note: Courier 10 is the factory default setting. Courier 10 shows the font
name, font ID, and the storage location in the printer. The font source
abbreviation is R for Resident, F for Flash, K for Disk, and D for download.
207