Scanning; Scanning To An Ftp Address - Lexmark 6500e User Manual

Scanning

Scanning
Automatic Document Feeder (ADF)
•
Use the ADF for multiple‑page documents.
•
Load letter- and A4- size documents into the ADF
facedown, long edge first.
•
Load legal- and A3- size documents into the ADF
facedown, short edge first.

Scanning to an FTP address

Creating shortcuts
Instead of entering the entire FTP site address on the scanner control panel each time you want to send a document
to an FTP server, you can create a permanent FTP destination and assign a shortcut number. There are two methods
for creating shortcut numbers: using the Embedded Web Server and using the scanner control panel.
Creating an FTP shortcut using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Navigate to:
Settings > Other Settings area > Manage Shortcuts > FTP Shortcut Setup
3
Enter the appropriate information.
Note: A password may be required. If you do not have an ID and password, then contact your system support
person.
Scanner glass
•
Use the scanner glass for single pages, small items (such
as postcards or photos), transparencies, photo paper, or
thin media (such as magazine clippings).
• Load an original document facedown on the lower left
corner of the scanner glass.
119