Lexmark 6500e User Manual page 208

Understanding the printer menus
Menu item
Symbol Set
10U PC‑8
12U PC‑850
PCL Emulation Settings
Point Size
1.00–1008.00
PCL Emulation Settings
Pitch
0.08–100
PCL Emulation Settings
Orientation
Portrait
Landscape
PCL Emulation Settings
Lines per Page
1–255
60
64
PCL Emulation Settings
A4 Width
198 mm
203 mm
Description
Specifies the symbol set for each font name
Notes:
•
10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
factory default setting.
• A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
Changes the point size for scalable typographic fonts
Notes:
•
12 is the factory default setting.
• Point Size refers to the height of the characters in the font. One point
equals approximately 1/72 of an inch.
•
Point sizes can be increased or decreased in 0.25‑point increments.
Specifies the font pitch for scalable monospaced fonts
Notes:
• 10 is the factory default setting.
•
Pitch refers to the number of fixed‑space characters per inch (cpi).
•
Pitch can be increased or decreased in 0.01‑cpi increments.
• For nonscalable monospaced fonts, the pitch appears on the display but
cannot be changed.
Specifies the orientation of text and graphics on the page
Notes:
• Portrait is the factory default setting. Portrait prints text and graphics
parallel to the short edge of the page.
• Landscape prints text and graphics parallel to the long edge of the page.
Specifies the number of lines that print on each page
Notes:
•
60 is the US factory default setting. 64 is the international default setting.
•
The printer sets the amount of space between each line based on the
Lines per Page, Paper Size, and Orientation settings. Select the desired
Paper Size and Orientation before setting Lines per Page.
Sets the printer to print on A4‑size paper
Notes:
•
198 mm is the factory default setting.
•
The 203‑mm setting sets the width of the page to allow the printing of
eighty 10‑pitch characters.
208