Setting The Outgoing Fax Or Station Name And Number - Lexmark 6500e User Manual

Faxing
Country/Region
•
Austria
• Cyprus
•
Denmark
•
Finland
•
France
• Germany
•
Ireland
•
Italy
For some countries or regions, a telephone line adapter is included in the box. Use this adapter to connect an answering
machine, telephone, or other telecommunications equipment to the printer.
1
Connect one end of the telephone cable that came with the scanner to the scanner LINE port
2
Connect the other end of the telephone cable to the adapter, and then connect the adapter to the active telephone
wall jack.
Note: Your telephone adapter may look different than the one shown. It will fit the wall jack used in your
location.

Setting the outgoing fax or station name and number

1
Type the scanner IP address in the address field of your Web browser.
If you do not know the IP address of the scanner, then you can:
• View the IP address on the scanner control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Settings > Fax Settings > Analog Fax Setup.
3
In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes.
4
In the Fax Number or Station Number field, enter the printer fax number.
5
Click Submit.
•
New Zealand
• Netherlands
•
Norway
•
Portugal
•
Sweden
• Switzerland
•
United Kingdom
109