Fax Settings Menu - Lexmark 6500e User Manual

Understanding the printer menus
Use
Sharpness
1–5
Temperature
‑4 to 4
Sample Copy
Off
On

Fax Settings menu

Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job by way of a telephone line.
General Fax Settings
Use
Restore Factory Defaults
Optimize Fax Compatibility
Station Name
Station Number
Station ID
Station Name
Station Number
Enable Manual Fax
Off
On
Memory Use
Equal
Mostly send
All send
All receive
Mostly receive
Cancel Faxes
Allow
Don't Allow
To
Adjust the amount of sharpness of a copy job.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the
default while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
Create a sample copy of the original document.
Note: Off is the factory default setting.
To
Restore the factory defaults of all fax settings.
Optimize fax compatibility with other fax machines.
Specify the name of the fax in the printer.
Specify the number assigned to the fax.
Specify how the fax is identified.
Note: Station Name is the factory default setting.
Set the printer to fax manually. This requires a line splitter and a telephone handset.
Notes:
•
Off is the factory default setting.
•
Use a regular telephone to answer an incoming fax job and to dial a fax
number.
•
Touch # 0 on the numeric keypad to go directly to this setting.
Define the allocation of non-volatile memory between sending and receiving fax jobs.
Note: Equal is the factory default setting.
Specify whether canceling of fax jobs is allowed.
Note: Allow is the factory default setting.
172