Lexmark 6500e User Manual page 171

Understanding the printer menus
Use
Custom Job scanning
Off
On
Allow Save as Shortcut
On
Off
Background Removal
‑4 to 4
Auto Center
Off
On
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
Best for Content
0–5
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Fix Scan Skew
Off
On
Scan edge to edge
Off
On
To
Scan a document that contains mixed paper sizes into a single copy job.
Notes:
•
Off is the factory default setting.
•
This menu appears only when a scanner hard disk is installed.
Save custom copy settings as shortcuts.
Note: On is the factory default setting.
Adjust the amount of background visible on a copy.
Note: 0 is the factory default setting.
Automatically align the content at the center of the page.
Note: Off is the factory default setting.
Specify which color to drop and to adjust the dropout setting for each color
threshold.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast used for the copy job.
Note: Best for Content is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a copy.
Note: 0 is the factory default setting.
Correct slight skew on the scanned image.
Note: Off is the factory default setting.
Specify if the original document is scanned edge-to‑edge.
Note: Off is the factory default setting.
171